Categories: Siemens

Siemens Front loading automatic washing machine WI12S140GB

WI12S140GB Siemens automatic washing machine

Download Siemens washing machine WI12S140GB user manual in PDF format: WI12S140GB-EN

Performance

Energy efficiency class: A+
Capacity: 7 kg
Maximum spin speed: 1200 rpm
remaining moisture: 57 %
B spin class
Energy consumption :218 kWh per year, based on 220 standard washing cycles
Energy consumption:standard 60 °C cotton programme 0.98 kwh full load and 0.97 kwh partial load and 40 °C cotton programme 0.83 kwh partial load
Cottons/colored 60°ECO+Intensi and Cottons/coloreds 40+IntensButt are the standard washing programmes to which the information in the label relates. These programmes are suitable to clean normally soiled cotton laundry and are the most efficient programmes in terms of combined energy and water consumption.
Programme time:60 °C cotton programme 149 min at full load 146 min at partial load and 40 °C cotton programme 130 min partial load
Weighted power consumption off-mode / left-on mode: 0.12 W / 2.77 W
Water consumption 10560 litres per year, based on 220 standard washing cycles
Drum volume: 55 litres
Noise level washing : 46dB (A) re 1pW: Noise level spinning:63dB (A) re 1 pW

Programmes/functions

Special programmes:
mixed fabrics 30°C
handwash/wool
delicates/silk programme
Option buttons:start, intensive button for power boost “A” wash, prewash option, less ironing, extra rinse, spin speed selection

Key features

Inverse logic: all programmes upto 40% faster as standard

Additional features

Fully electronic control dial for all wash and special programmes
Aquatronic wash system
hydroSafe – 24 hour anti-leak protection
Foam detection system
Out of balance load adjustment
Noise insulation package
End of cycle buzzer
Metal door catch

Technical Information

Dimensions (H X W X D): 81.8 x 60 x 57 cm
Height adjustment with cardanDrive
white door with 130° opening door and 30 cm porthole opening
Furniture door is reversible

Next Siemens washing machine IQ300 varioPerfect WM12Q390GB »

Previous « WM14Q360GB Siemens washing machine IQ 100 varioPerfect

View Comments

tracey says:

November 11, 2014 at 3:51 am

The door of the washing machine will not open at the end of the cycle. What do I do?
- anna says:
  
  November 12, 2014 at 1:44 pm
  
  Try to turn off the machine and push and hold the door. For the moment should lock open. Write if it helped please.
  - Ryan says:
    
    November 21, 2014 at 6:33 am
    
    Thank you Anna, this helped me! I pushed the door after wash cycle and then unlatched the lock to open it.
- santhosh.H says:
  
  May 3, 2015 at 10:28 am
  
  F26 fault M/C start botton no indication not restarti ng clothss inside.
  - marmen says:
    
    May 4, 2015 at 7:39 am
    
    F26 is a fault in the sensor door.
    
    Open and close the door to clear the display.
    The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.
    
    If opening and closing the door does not remove the error display, press Pause/Off or Pause/Cancel twice.
    If Pause/Off or Pause/Cancel does not work:
    
    -Unplug the washer or disconnect the power for one minute.
    - Plug in the washer or reconnect the power.
    - Re-select the cycle and press Start.
John Mac says:

February 5, 2015 at 1:11 pm

Anyone know how to turn off that annoying signal?
parth bhatt says:

June 15, 2015 at 5:53 pm

Siemens IQ100 front load, suddenly stopped no lights blinking at all. What to do.
Sunil says:

August 23, 2015 at 6:04 am

Hi,
My machine not getting water , washing without water if I start,
Kindly help me
Rohini says:

September 22, 2015 at 3:40 am

How to unlocked Siemens machine
- marmen says:
  
  September 22, 2015 at 8:01 am
  
  Hi, press and hold Start/Reload button for approx. 5 seconds
Georgia Geddes says:

April 14, 2016 at 1:50 pm

My machine door will not open! It just keeps flashing the key sign with a blue tick next to it! Help please
Millie Munro Clarke says:

July 25, 2016 at 5:36 am

I have a Siemens W1112S127EE which i bought in spain. I have tried to get a manual in english without success. I do not understand what the washing dial function means
appliance mechanic says:

September 1, 2016 at 11:16 am

If the door wont open, look at the filter inspection part., see a small plastic keyhole-shaped
part by CAREFULLY using a tool or similar press the part downwards, the the port will open BUT WAIT! >>>IF The machine is full of hot/near boiling water then WAIT until its a lot cooler
also if the machine is on deep rinse then you will get a flood of opened

its an emergency measure Only to use this door/port release procedure

take care
Shameer says:

October 14, 2016 at 3:43 am

How to unlock
Ron says:

December 22, 2016 at 12:13 am

Hi the button on the washing machine will not 'come out' after the door has been opened. I have to thump the front to get it to come forward.