Skip to content

Siemens Front loading automatic washing machine WI12S140GB

WI12S140GB Siemens automatic washing machine


Download Siemens washing machine WI12S140GB user manual in PDF format: WI12S140GB-EN



  • Energy efficiency class: A+
  • Capacity: 7 kg
  • Maximum spin speed: 1200 rpm
    remaining moisture: 57 %
  • B spin class
  • Energy consumption :218 kWh per year, based on 220 standard washing cycles
  • Energy consumption:standard 60 °C cotton programme 0.98 kwh full load and 0.97 kwh partial load and 40 °C cotton programme 0.83 kwh partial load
  • Cottons/colored 60°ECO+Intensi and Cottons/coloreds 40+IntensButt are the standard washing programmes to which the information in the label relates. These programmes are suitable to clean normally soiled cotton laundry and are the most efficient programmes in terms of combined energy and water consumption.
  • Programme time:60 °C cotton programme 149 min at full load 146 min at partial load and 40 °C cotton programme 130 min partial load
  • Weighted power consumption off-mode / left-on mode: 0.12 W / 2.77 W
  • Water consumption 10560 litres per year, based on 220 standard washing cycles
  • Drum volume: 55 litres
  • Noise level washing : 46dB (A) re 1pW: Noise level spinning:63dB (A) re 1 pW


  • Special programmes:
    mixed fabrics 30°C
    delicates/silk programme
  • Option buttons:start, intensive button for power boost “A” wash, prewash option, less ironing, extra rinse, spin speed selection

Key features

  • Inverse logic: all programmes upto 40% faster as standard

Additional features

  • Fully electronic control dial for all wash and special programmes
  • Aquatronic wash system
  • hydroSafe – 24 hour anti-leak protection
  • Foam detection system
  • Out of balance load adjustment
  • Noise insulation package
  • End of cycle buzzer
  • Metal door catch

Technical Information

  • Dimensions (H X W X D): 81.8 x 60 x 57 cm
  • Height adjustment with cardanDrive
  • white door with 130° opening door and 30 cm porthole opening
  • Furniture door is reversible

20 thoughts on “Siemens Front loading automatic washing machine WI12S140GB”

  1. I have an SI 12:214 .. the start/pause button is flashing along wih all the status lights and all the spin lights. The door won’t open either.

  2. How to open the door of the washing machine which is not yet finish.? Because i try to dry to use the drier in the machine and switch it off to stop it and not to continue…

  3. Hi the button on the washing machine will not ‘come out’ after the door has been opened. I have to thump the front to get it to come forward.

  4. If the door wont open, look at the filter inspection part., see a small plastic keyhole-shaped
    part by CAREFULLY using a tool or similar press the part downwards, the the port will open BUT WAIT! >>>IF The machine is full of hot/near boiling water then WAIT until its a lot cooler
    also if the machine is on deep rinse then you will get a flood of opened

    its an emergency measure Only to use this door/port release procedure

    take care

  5. Millie Munro Clarke

    I have a Siemens W1112S127EE which i bought in spain. I have tried to get a manual in english without success. I do not understand what the washing dial function means

      1. F26 is a fault in the sensor door.

        Open and close the door to clear the display.
        The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.

        If opening and closing the door does not remove the error display, press Pause/Off or Pause/Cancel twice.
        If Pause/Off or Pause/Cancel does not work:

        -Unplug the washer or disconnect the power for one minute.
        – Plug in the washer or reconnect the power.
        – Re-select the cycle and press Start.

Leave a Reply

Your email address will not be published. Required fields are marked *