Automatic washing machine Bosch WAE24377GB Serie 4
Download user manual Bosch WAE24377GB
in PDF format: WAE24377GB
Technical specs
- Energy efficiency class: A+++
- Capacity: 7 kg
- Maximum spin speed: 1200 rpm
Remaining moisture: 53 % - B spin class
- Energy consumption :165 kWh per year, based on 220 standard washing cycles
- Energy consumption:standard 60 °C cotton programme 0.72 kwh full load and 0.73 kwh partial load and 40 °C cotton programme 0.67 kwh partial load
- Cottons 60 Eco and Cottons 40 Eco are the standard washing programmes to which the information in the label relates. These programmes are suitable to clean normally soiled cotton laundry and are the most efficient programmes in terms of combined energy and water consumption.
- Weighted power consumption off-mode / left-on mode: 0.2 W / 1.9 W
- Water consumption 10686 litres per year, based on 220 standard washing cycles
- Programme time:60 °C cotton programme 215 min at full load 215 min at partial load and 40 °C cotton programme 186 min partial load
- Drum volume: 55 litres
- Noise level washing : 59dB (A) re 1pW: Noise level spinning: 77dB (A) re 1 pW
- Fully electronic control dial for wash programmes, temperature and special progammmes
- Special programmes: Super Quick 15, Mixed Load,Delicates 30 degrees
- Touch control buttons: Start / Reload / Pause, Reduced Ironing option, Aqua Plus option for best rinsing results, EcoPerfect, SpeedPerfect, Spin speed reduction
- Safeguard monitoring system adjusts load distribution and programme settings to protect clothes
- VarioPerfect: speed or energy efficiency with perfect wash performance every time
- Display for programme progress indication,time remaining and 24 hours time delay
- 3D AquaSpa wash system with cascade for faster water penetration
- Reload facility
- Overdosage indication
- Buzzer to indicate the end of cycle
- Metal door catch
- Child lock
- Multiple Water Protection
- Automatic load adjustment system
- Foam detection system
- Dimensions (H X W X D): 84.8 x 60 x 59 cm
- Can be built-under
- Large white door with 180° opening and 30 cm porthole
My machine stop in E21,can you help me .
Thank you
How do I wash but not spin ?
The rubber ring in the doorway carries more water in the fold of the ring after finishing.
We always insert a towel at the bottom in the fold to soak up the water.
No water leaks on the floor. The machine is 6 years old and works perfectly .
Should something be done?
The washing cycle is too long .
My previous Bosch was much shorter.
What is the best setting for a reasonable wash in a shorter time besides the speed cycle
This machine has SpeedPerfect function, use it, the machine will wash shorter time.
My Bosch serie 4 is unable to enter the spin cycle. There will be a lot of water in the drum when the spin cycle is supposed to start so it ends up having an error. The water is not drained before the spin cycle begins. The drum is able to spin during the wash cycle.
My Samsung serie 4 can’t enter the spin cycle. There will still be a lot of water inside when the spin cycle is supposed to start and the spin cycle will be unable to start. The drum is able to rotate fine during the wash cycle.
Where can I get the rubber door seal as mine needs replacing?
Machine has stopped mid cycle .it shows E18.i can’t restart it.please advise
Hi Cathy, fault E18 means:Drainage hose blocked or kinked
Solution:
“Clean filters in the water supply hose. Attention: The leaking water may be very hot (risk of scalding). Set programme selector to . Pull out the mains plug. Check whether the drainage hose has been installed without kinks. Loosen hose clip on the siphon, carefully remove drainage hose (residual water). Clean drainage hose and siphon spigot. Hold drainage hose in a bucket and select the programme. Connect drainage hose to the siphon and check for leaks.”
which side do i putsap detergrnt and smelling powder
also water remin in rubber and starts tosmell
why is the key flashing and the machine not working
Why is the key sign flashing and the machine not working
why is the key flashing and the machine not working?
It could be the child lock. To unlock – press the start/stop button for 5-6 seconds.
How do I activate the spin only programme
How do I get spin ONLY ??
Machine has stopped mid cycle showing E18. How do I sort this pkease
Anyone know how to turn the sound down on the beeping noise when the cycle has finished.
Thank you.
Justlove my Bosch w,machine but water not going away in compartment after rinsing most annoying could you advise me please
My Maxx VarioPerfect (7kg) seems to have lost its timing. Upon starting any program, it releases water and detergent but barely a minute later, it starts to drain!
Please advice if there are any steps for full reset of the electronics.