Washing machine Siemens WM12Q360GB
Download user manual Siemens WM12Q360GB in PDF format: WM12Q360GB
- Energy efficiency class: A+++
- Capacity: 8 kg
- Maximum spin speed: 1200 rpm
remaining moisture: 53 % - B spin class
- Energy consumption :179 kWh per year, based on 220 standard washing cycles
- Energy consumption:standard 60 °C cotton programme 0.82 kwh full load and 0.8 kwh partial load and 40 °C cotton programme 0.71 kwh partial load
- Cottons/coloreds 60+ecoPerfectCottons/coloureds ECO 60 and cottons/coloureds Eco 40 Cotton/color 40/60+ ecoPerfect are the standard washing programmes to which the information in the label relates. These programmes are suitable to clean normally soiled cotton laundry and are the most efficient programmes in terms of combined energy and water consumption.
- Weighted power consumption off-mode / left-on mode: 0.1 W / 1.49 W
- Programme time:60 °C cotton programme 196 min at full load 191 min at partial load and 40 °C cotton programme 186 min partial load
- Water consumption 8700 litres per year, based on 220 standard washing cycles
- Drum volume: 58 litres
- Noise level washing : 54dB (A) re 1pW: Noise level spinning:76dB (A) re 1 pW
Programmes/functions
- Fully electronic control dial for wash programmes, temperature and special progammmes
- Special programmes: rapid 15 minute quick wash , textile guard re-proofing programme, mixed fabric quick wash programme,delicates/silk programme
- Touch control buttons: start/reload, less ironing, extra rinse, ecoPerfect, speedPerfect, spin speed selection
Key features
- varioPerfect:speed or energy efficiency with perfect wash performance every time
- antiVibration Design – for more stability and quietness
Additional features
- Display for programme progress indication,time remaining and 24 hours time delay
- Aquatronic wash system
- waveDrum
- Flow-through sensor for optimum water use
- autoLoad
- Reload facility
- Detergent over dosage display
- End of cycle buzzer
- Self cleaning detergent dispenser
- Electronic child safety package
- Metal door catch
Technical Information
- Dimensions (H X W X D): 84.8 x 59.8 x 55 cm
- Slide-under installation
- Large white door with 165° opening and 32cm porthole opening
Internal article number: WM12Q360GB
EAN code: 4,242,003,616,604
Built-in / Free-standing: Free-standing
Installation typology: Built-under
Loading type:Front
Door hinge: Left
Color / Material panel: White
Color / Material body: White
Connection Rating (W): 2300 W
Current (A): 13 A
Voltage (V): 220-240 V
Frequency (Hz): 50 Hz
Approval certificates: CE, VDE
Length electrical supply cord (m): 160.0 cm
Plug type: GB plug
Height of the product (mm): 848 mm
Dimensions of the product (mm): 848 x 598 x 550 mm
Net weight (kg): 66.000 kg
Gross weight (kg): 67.000 kg
Washing performance class: A
Spin drying performance class: B
Noise level washing (dB(A) re 1 pW): 54 dB (A)
Noise level spinning (dB(A) re 1 pW): 76 dB (A)
Spin speed options: Variable
Foam control: Yes
Water protection system: Multiple water protection
Cold wash option: No
Drying progress indicator: LED-display
Digital countdown indicator: Yes
Start delay options: Continuous
Pre-wash: available
Quick wash: Yes
Door opening: Handle
Tub material: Plastic
Drum volume (l): 58 l
Drum material: Stainless steel
Hot & cold water intake: No
Programme end indication: Acoustic, LED-display
Loading sensor: No
Height-adjustable by: 1.00 cm
Whites and coloureds programme: 20°C, 30°C, 40°C, 40°C Prewash, 60°C, 90°C
Easy-care programme: 30°C, 40°C
Depth with door open (90°): 101.40 cm
Detergent dispensing: From front, self cleaning
Temperature selection: Programme selector
Hiw do i start the machine its beeped and nithing happening ening
Error E03?
Did anyone ever get an answer in here???
Getting error message 00, red key flashing on alarm panel, cannot open the door – can you please help?
Problem: “nr0” (Key symbol) means: The childproof lock has been activated.
Push and hold Start button for 5 seconds
SIEmens iq100. Getting error code E:26.
How to reset it please help
How do I get child lock off/on the iq100?
What does the code e34 mean?
Hi, E34 mens: Door is not locked properly
Solution
Close the door properly (clicks audibly). In particular, a full loadmay prevent the door from being closed properly. Also check whether an item of washing is jammed between the door and housing. Restart the programme.
Erreur 17 ??
Hi, error E17 means: Water pressure too low.
Solution:
Check the water pressure directly on the tap using a bucket. Approximately 10 litres of water per minute must flow out of the fully open tap. Contact your fitter if the water pressure is too low.
Door not opening, what can I do to fix it@
How do I turn off child lock on a siemens varioPerfect IQ 100 washing machine? As I now can’t get it to start and is displaying CL.
How do I get child lock off a varioperfect IQ100 washing machine?. As I now can’t get it too work.
defaut E16 ,verrouillage de la porte ,tout essayé
I am getting Error code e:16 … what does this mean?
Fault E16 mean: Very high water level – Error. Probably a problem with a switch of water
what does a badket eign over the time mean
Guys and Gals
I have an iQ100 and it beeping at the end of the programme until someone attends to it. I’m not sure who thought this was a good idea – can you help me switch it off please. Please before we all go mad!!
Hi My IQ100 has just finished a program with the usual “End” showing in the display. However now it can’t start any new programs with either “End” og off is the only thing being in the display. I’ve cut power and tried every program.
I’ve tried all programs and settings. Can you please advice?
What does E05 means?
Hi, fault E05 indicates a time out filling.
Check the water supply, clean the filter at the start of the hoses.
I have a Siemans IQ100 washing machine and i keep getting E18 which apparently indicates a draining failure.
Can be clogged filter, or a fault on the pump
all i can do is empty the machine or do a final rinse and spin (both of which work) but the cycle will not finish – do i need to call an engineer? thanks
However, if the filter is clean, you have to call a repairman
Hi I have a iQ100 and it seems to not want to spin, and came up with E18 at the end, had water in it so put it on empty do not work, so just put it on rinse and spin which only should be 22mins, now it’s showing 33 and counting down, what do you think the problem is ?? Please help as have lots of washing to do, thank you
My Siemens IQ 100 Vario Perfect is indicating E 13 and will not complete its final draining spin. WHat is causing this?
How do I get child lock of the iq100
Hi, how get Child Lock off.
Press the TEMP and OPTION button together for 3 seconds