Skip to content

Vented tumble dryer Bosch WTA74200GB

tumble dryer WTA74200GB

Classixx 7 Vented tumble dryer WTA74200GB

tumble dryer WTA74200GB
tumble dryer
WTA74200GB

 

Download Bosch tumble dryer WTA74200GB  user manual in PDF format: tumble-dryer-WTA74200GB

Technical specifications

General Properties
Product group Tumble Dryer
Built-in / Free-standing Free-standing
Removable top No
Loading type Front
Door hinge right
Heater type Electric
Connection Rating (W) 2,200 W
Current (A) 10 A
Frequency (Hz) 50 Hz
Approval certificates CE, VDE
Length electrical supply cord (m) 145.0 cm
Plug type GB plug
Height of removable worktop (mm) 842 mm
Height of the product (mm) 842 mm
Net weight (kg) 33 kg
Gross weight (kg) 34 kg
Dryer type Air-vented
Moisture monitoring system Autom thr electr damp detect
Drying time selector No
Adjustable drying temperature Yes
Reverse tumble action No
Interior light No
Location of venting exit At rear, Left-hand
Vent hose Yes
Vent hose length (cm) 200.00 cm
Drying progress indicator LED-display
Digital countdown indicator Yes
Start delay options Continuous
Blocked filter indicator Yes
Exhaust water pipe No
Quick dry No
Anti-crease 60 min
Drum volume (l) 112 l
Drum material Galvalume
Wall-mounted assembly No
Door panel options No
Fluff filter Yes
Programme options for drying dessous, Mixture, shirts/blouses, Sportswear, Super 40, Time program cold, Time program warm, towels, Woollens finish
Drain set for condensate No
Poss f perm con of condens out No
Drying control Autom thr electr damp detect
Electronic After-sales Service Yes
Brand Bosch
Product name / Commercial code WTA74200GB
EAN code 4,242,002,766,607
EAN Barcode ‘!2E20AC-hgggah!
Tumble Dryers
Voltage (V) 220-240 V
Dimensions of the product (mm) 842 x 597 x 629
Dimensions of the packed product (HxWxD) (mm) 865 x 630 x 680 mm
Noise level (dB(A) re 1 pW) 65 dB
Full tank indicator No

24 thoughts on “Vented tumble dryer Bosch WTA74200GB”

  1. I turn the dryer on then stops after a few seconds display a red flashing box with lines across it what does this mean

  2. My panel is showing the code E 09. I can not find this code. What does this mean? The dryer runs on cold air only. Thankyou.

    1. Hi Wendy, fault E09 mean: “Fault with the electronics”.
      Unfortunately, the manufacturer does not provide more information

    1. Clean the filter at the bottom of your dryer. It’s the flap under the main door remove both filters clean them and replace. Your dryer should work perfectly now

  3. Problems with start and stop a few seconds later?????
    If I known this I would just got myself a simple dryer,🤨

  4. On Page 5 of the manual there are instructions for “Fine adjustment of the drying result”.
    Viz: Turn to OFF; 1 click to the right; Press and hold the low heat button and turn 5 clicks to the right; Press the low heat button until the required level is reached…THEN “Turn to OFF”
    Well if you turn to OFF, the tumble dryer is switched off and nothing happens!
    What am I doing wrong, please?

  5. I have a vented Bosch Classixx 7 tumble dryer. It does not always work.just now it showed 92 minutes I pressed Low Heat Button and then pressed Start Pause. It started but after few minutes it stopped and said End
    I often put it on 40 or 20 minutes ,press low heat ,followed by start. It sometimes starts and after few minutes stops and says End. Often does not work at all

  6. Mine keeps skipping timer I’ll put it on for 40mins and then go down 2mins in seconds and then turn off

Leave a Reply

Your email address will not be published. Required fields are marked *